______________________________________________________
8
1 Product description
1.1 Intended use
The DB 2090 ST bending machine is exclusively used to produce tube
bends from precision steel tubes to DIN 2391/C material St 37.4. Likewise for all
other tubes and materials, which permit a deformation at low temperatures.
All indicated performance data, as well as the other technical specifications of the
machine must be kept without exception. Another or beyond going use is not
considered than intended purpose. The company Maschinenbau GmbH
is not responsible fordamages which are happened by inadequate operating
The intended purpose also includes the observance of all notes
and requiste safety regulations from the manual and the
observance of the inspection and maintenance work
The operator of the machine must ensure that the machine and all its parts only used
in keeping with their intended purpose, and that the machine is only operated in a
faultless functional condition.
The user of the machine is under obligation to immediately switch off the machine in
the event of any safety relevant changes to the machine or its operating behaviour,
and to immediately notify the operator of such disruptions
Persons can be injured, and the machine can be damaged, if care
in the operating of the machine is insufficient or if the machine is
not used in conformity with its inteded purpuse.
To Next Page