Transfluid DB 2090 ST - Checks before Start up the Machine

Spart up the machine
57
7.1 Checks before start up the machine
Before the first start up of the machine and before the first employment in production
the following points are to be considered:
Pos.
Activity
1
Check the level of the hydraulic aggregate at the oil level indicator
and if necessary fill hydraulic oil (HLP 46) into the tank!
2
Check the level of the mandrel lubrication system and if necessary
fill lubricating oil into the vessel!
3
Check if all necessary electrical connections are pluged and the plugs
sit firmly!
4
Check if all safety dvices are appropriated at the machine and
function too!