Transfluid DB 2090 ST - Machine Equipment; Basic Accessories; Machine Basic Equipment

General product description
9
1.2 Machine equipment / basic accessories
1.2.1 Machine basic equipment
 Arbor length/Useable length 4000 mm
 Radii max. 240 mm
 Bending height 1050 mm
 Bending head protection 850 mm
 With compact bending head protection giving min. distance between two
bends up 600 mm when bending above below the head
 Power bending axis electro hydraulic
 Power rotation and length via electric servo motor
 Bending direction clockwise
 With recessed shaft to get small radii
 Following pressure die return over hydraulic cylinder
 Wide opening of pressure die to allow off-set bend device to move to a short
distace from bending head
 The emergency area in front of the machine is controlled via scanner
 The machine is confirm to the electric and mechanical security guidelines and
the CE norm
 With a barrier system around the machine, this guarding system is opening in
the front and is controlled with a laserscanner which is integrated in the
machine
 Includes mandrel lubrication unit
 Injection by hand button or automatic in the bending operation clamping
 Standard-norm-hydraulic-components
 Maschine stationary
 Colour RAL 3000 red, 7037 grey