Transfluid DB 2090 ST - Safety Precautions in Normal Operation

General safety instructions
22
3.5 Safety precautions in normal operation
The machine may only be operated by authorized and trained personnel, which can
know the manual and work afterwards!
Before starting familiarise yourself sufficiently with
 the machine's operating and control elements
 the machine's fittings
 how the machine works
 the immediate environment of the machine
The following activities must be performed prior to starting the machine each
time:
 Check to make sure that all safety devices are fitted and functioning
 Check the machine for visible damage; any defects found must be corrected
immediately or reported to the supervisor - the machine may only be operated
if it is free of faults
 Make sure that only authorised persons remain within the operating area of
the machine and that no other persons are endangered when the machine is
started up
 All objects and other materials which are not required for operation of the
machine must be removed from the machine's operating area
While the machine is in operation, no safety devices may be removed or deactivated.