General safety instructions
3.9.3 Hazard due electrical energy
The machine is powered by either (except from version with 230V /AC or 400V /AC).
Certain safety measures have to be observed when dealing with electrical energie.
All work on the System’s electrical power supply must only be
completed by a qualified electrician.
If your company does not emply a works electrician, then a
correspondingly trained person must be commissioned with
the work.
All persons who are not authorized to complete work on the
System’s electricial power supply must be barred from gaining
access to the inner space of the control housing.
Involvement with electrical power entails a danger of death!
The system must first be made currentless before any work on the
System can commence.
To Next Page