97
9 Trouble shooting
When eliminating faults in the machine you must observe the following safety
instructions in order to avoid lethal injury, damage to the machine and other material
damage.
WARNING!
All work on the electrical and hydraulical equipment of the
machine must be carried out by trained electrical specialists only.
The machine operators may recover only such disturbances
independently, which are to due obviously to operating errors!
Switch off all voltage sources and secure and against
unauthorized switching on.
Watch out for the following special dangers when eliminating faults on the machine
If power sources are switched on inadvertently, serious injury to
persons and damage to the machine may result.
To Next Page