Transfluid DB 2090 ST - EC - Declaration of Conformity

General product description
15
EC – Declaration of conformity
in keeping with the European Machinery Directive (89/392/EWG), appendix II A
The manufacturer:
transfluid Maschinenbau GmbH
Hünegräben 20
57392 Schmallenberg
hereby declares that the machine:
Mandrel bending machine DB 2090 – TP - CNC
Serial number: 70090
Year of manufacture: 04/2003
Complies with the health and safety
protection requirements of the
following EC directives:
ECC-machine directive 89/392/EWG in the
version 98/37/ECC
ECC-low voltage directive 73/23/EWG in the
version 98/37/ECC
ECC-electro-magnetic compatibility 89/336/EWG
in the version 93/97/EWG
Harmonised standarts used
DIN EN 292, Part 1 and Part 2
Safety of Machines, Equipment and Plants
DIN EN 294
Safety margin against achieving danger places with
upper member masses
DIN EN 349
Minimum distances for the avoidance of squeezing
of the body parts
DIN EN 418
Safety of Machines, Emergency Stop Equipment
DIN EN 60204
Part 1
Safety of Electrical Equipment for Industrial
Machines
The declaration of conformity is void if changes are made to the construction of the
machine which affect the technical specifications and prescribed use as indicated in
the operating manual, i. e. wich essentially change the machine!
The signing person is authorized for signing this declaration in representation of the
manufacturer.
Schmallenberg, 28.01.2015
_______________________
(Signature / Stamp)