Transfluid DB 2090 ST - Requirements of Personnel

General safety instructions
19
 these personnel are regularly instructed in all matters relating to occupational
safety and environmental protection and are familiar with the operating manual
and in particular the safety instructions it contains
 all safety instructions and warnings on the machine are visible and legible and
are not removed.
3.2 Requirements of personnel
The machine may only be operated by persons who have been specially trained,
briefed and authorised. These persons must be familiar with the operating manual
and act in accordance with it. The respective areas of authority of the operating
personnel must be clearly defined.
Furthermore, the following activities require special qualifications:
 Transport
 Setting up
 Putting into operation
 Induction
 Fault recovery
 Servicing
 Cleaning
 Maintenance
 Repair
 Withdrawal from service