PROJECT MENU
The gauge can store approximately 750 readings. The Project and
Store functions allow handling of measurement data. Measurement
results are stored in files (memory locations) called projects, which
are named by the operator. Projects are managed using the
Projects menu. From this menu, the operator can select a project
(make an existing project active so that additional data may be
added to it), view project data, create a new project, erase projects,
output project data to the selected destination (via the serial or USB
port), deactivate a project, and enable the Auto-Store function.
To access the Projects menu, press 〈PROJ〉. The gauge displays:
NOTE
The 〈PROJ〉 key is active only when the Ready screen is
displayed.
Use the arrow keys to scroll through the menu options. Use the
numeric keys to select a menu option. Press
〈ESC〉 to return to the
Ready screen.
To Next Page
Loading...
Need help?
General
