Troxler 3430 Plus - View Standard Counts

4–
VIEW STANDARD COUNTS
To view the last four standard counts, press 〈NO〉 at the display
shown at the bottom of page
4–2. The gauge displays:
 Press 〈YES〉 to view the last four standard counts. The gauge
displays the last four density standard counts. Press
〈YES〉 to
view the last four moisture standard counts. Press
〈ENTER/START〉 to return to the Ready screen.
 Press 〈NO〉 to return to the Ready screen.
 
  
  
  