Model 3430 Plus & 3440 Plus
CREATE A PROJECT
To create a new project, press 〈3〉 at the Projects menu shown on
page
8–2. The gauge displays:
Press the 〈ALPHA LOCK〉 key to enable the alphabetic keys on the
gauge. When the alphabetic keys are enabled, the symbol appears
in the upper right of the display, as shown above.
Enter the project name (up to twelve alphanumeric characters) and
press the
〈ENTER/START〉 key. The gauge displays:
To save the new project name without activating it, press 〈NO〉.
The gauge saves the new project, briefly displays the name of
the active project (if any), and returns to the Projects menu.
To save the new project name and activate the project, press
〈YES〉. The gauge enables the new project, displays a brief
confirmation message, and returns to the Projects menu.
To Next Page
Loading...
Need help?
General
