Troxler 3430 Plus - Erase Standard Counts

9–
ERASE STANDARD COUNTS
The Erase Standard Counts function allows the operator or service
technician to remove all (four) standard counts from gauge memory.
To execute the Erase Standard Counts function, press 〈6〉 at the
Extended menu shown on page 9–1. The gauge displays:
 To return to the Extended menu without erasing the standard
counts stored in memory, press
〈NO〉.
 To erase all the standard counts, press 〈YES〉. The gauge erases
the standard counts stored in memory and returns to the
Extended menu.
 
 
  