Troxler 3430 Plus - Software Reset

9–
SOFTWARE RESET
The Software Reset function sets selected user setup values (count
time, measurement units, depth mode, user ID, customer name, etc.)
to their factory default values.
NOTE
The Software Reset function does not affect the
calibration constants, gauge serial number, clock and
calendar settings, or projects stored in the gauge
memory.
To access this function, press 〈7〉 at the Extended menu shown on
page
9–1. The gauge displays:
 To return to the Extended menu without resetting system
variables, press
〈NO〉.
 To reset system variables to default values, press 〈YES〉. The
gauge resets the system variables and returns to the Extended
menu.
  
  
 
  