Troxler 3430 Plus User Manual

Model 3450
5–11
ENABLE NOMOGRAPH
To enable the Nomograph function, press 〈1〉 at the Nomograph
menu shown on page
5–10. The gauge enables the function,
displays a brief confirmation message, and returns to the Setup
menu.
DISABLE NOMOGRAPH
To disable the Nomograph function, press 〈2〉 at the Nomograph
menu shown on page
5–10. The gauge disables the function,
displays a brief confirmation message, and returns to the Setup
menu.
CHANGE/VIEW NOMOGRAPH DATA
To change or view the Nomograph data, press 〈3〉 at the
Nomograph menu shown on page 5–10. The gauge displays:
To return to the Setup menu without changing the Nomograph
data, press
〈NO〉.
To change the Nomograph data, press 〈YES〉. The gauge displays:
The wet density of the underlying or base material may be entered
either manually using the keypad or by using the gauge to record
actual measurements.
  
  
   

  
 
 
 
5. SETUP MENU

Troxler 3430 Plus Specifications

General

Brand	Troxler
Model	3430 Plus
Category	Measuring Instruments
Language	English