VIEW
The gauge offers two methods of viewing data. The operator can
either view the last measurement results using the Recall function
described on page 4–17, or any measurement results, including
project notes, stored in a project file using the View function
available from the Projects menu.
To view data stored in a project file, press 〈2〉 at the Projects
menu. The gauge displays:
Use the arrow keys to scroll through the project names. Press
〈ENTER/START〉 when the gauge displays the desired project
name. If any measurement data has been stored in the selected
project file, the gauge displays the data for the first measurement.
Six screens of information are displayed for each measurement. Use
the up and down arrows to scroll through the project data.
Press the 〈ESC〉 key to return to the project selection screen shown
above.
To Next Page
Loading...
