Troxler 3430 Plus - Target Values; Enable a Target Value

Model 3430 Plus & 3440 Plus
6–3
TARGET VALUES
NOTE
Because the menus for managing the Gmb (Marshall),
Proctor, and Gmm (Voidless density) values are
essentially the same, the following sections describe only
the Gmb (Marshall) menu.
To edit a Marshall, Proctor, or voidless density value, press the
number key that corresponds to that target value, as shown on the
Target menu (see page 6–2
). For example, to edit the Gmb
(Marshall) value, press
〈1〉.
The gauge displays the selected Target Value menu. The menu for
the Gmb (Marshall) value is:
The Target Value menu shows the target values stored in memory
(if any) and the New and Disable options.
ENABLE A TARGET VALUE
To enable a target value displayed on the Target Value menu, press
the corresponding number key. The gauge enables the target value
and returns to the Ready screen.
   

   
   

 
6. TARGET MENU