Troxler 3430 Plus User Manual

Model 3430 Plus & 3440 Plus
8–13
NO PROJECT DATA
If the operator attempts to enable the Auto-Store function but no
project has been created, the gauge displays:
 To return to the Projects menu without enabling the Auto-
Store function, press
〈NO〉.
 To create a project and enable the Auto-Store function, press
〈YES〉. The gauge displays the screens required to create a
project as described on page
8–5. When the project name is
complete, the gauge sets the project as active, displays the
confirmation message shown on page 8–12, and returns to the
Projects menu.
NO PROJECT SELECTED
If the operator attempts to enable the Auto-Store function and one or
more projects have been created, but no project has been selected as
active, the gauge displays:
 To select an existing project, press 〈1〉. The gauge displays the
screens required to select a project as described on page
8–3.
After the project is selected, the gauge sets the project as active,
briefly displays the confirmation shown on page 8–12, and
returns to the Projects menu.
 To create a new project, press 〈2〉. The gauge displays the
screens required to create a project as described on page
8–5.
After the project is created, the gauge sets the project as active,
briefly displays the confirmation shown on page 8–12, and
returns to the Projects menu.
  
   
  
  
 
  
  
  
8. PROJECT DATA

Troxler 3430 Plus Specifications

General

Brand	Troxler
Model	3430 Plus
Category	Measuring Instruments
Language	English