Troxler 3430 Plus - Page 42

3–12
Clock/Calendar
The Clock/Calendar function allows the operator to change the date
and time, and to select the display format for each. To access the
Clock/Calendar menu, press
〈1〉 at the Extended menu. The
gauge displays the Clock/Calendar menu:
Use the up and down arrows to scroll between the menu options. To
select a menu option, press the corresponding numeric key. To
return to the Extended menu, press the
〈ESC〉 key.
CHANGE TIME. To change the time, press 〈1〉 at the
Clock/Calendar menu. The gauge displays:
(Note that in this example, the time is displayed in AM/PM format.
To change the format, see the Time Format section on the following
page.) To accept the displayed time, press
〈ENTER/START〉. To
change the time, use the numeric keys to enter the new time, and the
arrow keys to toggle between AM and PM. Press
〈ENTER/START〉. The gauge sets the time and returns to the
Clock/Calendar menu.
 
  
  
  


  
 
  
  
 