Model 3440-L 6–17
6. SPECIAL FUNCTIONS
Bottom Density – Keypad Entry
From the Select to set– display, press 〈1〉 for:
Average bottom
density:
x.x PCF
Want to change?
If the display value is correct, press 〈NO/CE〉.
Press 〈YES〉 if the value is to be changed. The display will be:
Select method of
Entering density
1 - Keypad
2 - Measure
Press 〈1〉 to enter data with the keypad. The display will be:
Bottom density-
x.x PCF
Press ENTER
when completed
Enter the density of the bottom layer. The next display will be:
NOMOGRAPH
ON
To Next Page
Loading...
