TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 115 Copyright 2013 All Rights Reserved.
 XOR$( )
Description
This command can encode the original data to a new data by logic XOR.
Syntax
XOR$(data$,password$)
Parameter
Description
data$
The original data needs to be encoded by password$.
password$
This parameter will be used to create the new data.
Note:
This command has been supported since V6.38 EZ and later firmware.
Example
Sample code
data$="1234"
password$="ABCD"
encoded$=XOR$(data$,password$)
deconded$=XOR$(encoded$,password$)
SIZE 4,0.5
GAP 0,0
CLS
TEXT 10,10,"3",0,1,1,"Encoded data: "+encoded$
TEXT 10,60,"3",0,1,1,"Decoded data: "+deconded$
PRINT 1
Result

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC