TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. VI Copyright 2013 All Rights Reserved.
Document Conventions
This manual uses the following typographic conventions.
Convention
Description
[expression list]
Items inside square brackets are optional, expression maximum length 2*1024
bytes.
<ESC>
ASCII 27, control code of status polling command returns/runs the printer
status immediately.
~
ASCII 126, control code of status polling command returns the printer status
only when the printer is ready.
Space
ASCII 32, characters will be ignored in the command line.
"
ASCII 34, beginning and ending of expression.
CR, LF
ASCII 13, ASCII 10, denotes end of command line.
NULL
ASCII 0, supported in the expression.
Note:
203 DPI: 1 mm = 8 dots
The font in bold and italic type is used for note.

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC