TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 140 Copyright 2013 All Rights Reserved.
 GOTO
Description
This command is used to branch to a specified label. The label cannot exceed 8 characters in length.
Syntax
GOTO LABEL
:LABEL
Parameter
Description
LABEL
Beginning of the point. The maximum length of the label is 8 characters.
Example
Sample code
DOWNLOAD "GOTO1.BAS"
SIZE 4,3
GAP 0,0
DIRECTION 1
CLS
A=0
TOTAL=0
:START
IF A<100 THEN
GOTO SUM
ELSE
GOTO PRTOUT
ENDIF
:SUM
A=A+1
TOTAL=TOTAL+A
GOTO START
:PRTOUT
B$="THE SUMMATION OF 1..100 IS
"+STR$(TOTAL)
TEXT 10,100,"3",0,1,1,B$
PRINT 1
END
EOP
Result
See Also
DOWNLOAD, EOP, END, GOSUB…RETURN

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC