TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 130 Copyright 2013 All Rights Reserved.
 FOR…NEXT LOOP
Description
Loop is used to execute one or more lines of program repetitively. A loop counter value specifies the
number of executions. Nested loops are allowed (up to 39 nested loops) in this printer. Jumping out in
the middle of the FOR…NEXT loop is prohibited.
Syntax
FOR variable = start TO end STEP increment
statement; start < end
[EXITFOR]
NEXT
Parameter
Description
variable
The variable name is (up to 8 characters)
start
Integer or floating point numbers
end
Integer of floating point numbers
increment
Integer or floating point, positive or negative
EXITFOR
Exit for loop
Example
Sample code
DOWNLOAD "TEST.BAS"
SIZE 4,2.5
GAP 0,0
CLS
FOR I=1 TO 10 STEP 1
TEXT 100,10+30*(I-1),"3",0,1,1,STR$(I)
NEXT
FOR I=1 TO 1000 STEP 100
TEXT 200,10+((I-1)/10)*3,"3",0,1,1,STR$(I)
NEXT
FOR I=110 TO 10 STEP -10
TEXT 300,10+(ABS(I-110))*3,"3",0,1,1,STR$(I)
NEXT
FOR I=1 TO 5 STEP 0.5
IF I-INT(I)=0 THEN Y=10+60*(I-1) ELSE Y=Y+30
TEXT 400,Y,"3",0,1,1,STR$(I)
NEXT
PRINT 1
EOP
TEST
Result
See Also
DOWNLOAD, EOP

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC