TSC TTP-247 - Troubleshooting and Status Indicators; Troubleshooting Common Problems; LED Status and Interpretation

TSC AUTO ID Technology Co., Ltd. 31 Copyright 2013 All Rights Reserved.
 EOJ
Description
Let the printer wait until process of commands (before EOJ) be finished then go on the next command.
Syntax
EOJ
Note:
This command has been supported since V6.39 EZ and later firmware.
Example
Sample Code
SIZE 4,0.2
GAP 0,0
DIRECTION 1
CLS
TEXT 10,10,"3",0,1,1,"Two labels are printed without stop."
PRINT 1
PRINT 1
SIZE 4,0.2
GAP 0,0
CLS
TEXT 10,10,"3",0,1,1,"Printer stops before next printing."
PRINT 1
EOJ
PRINT 1
Result
Paper feed direction
without stop