TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 159 Copyright 2013 All Rights Reserved.
 INSTR ( )
Description
Returns an integer specifying the start position of the first occurrence of one string within another.
Syntax
INSTR ([start,]str1$,str2$)
Parameter
Description
start
Optional. Numeric expression that sets the starting position for each search.
If omitted, search begins at the first character position. The stat index is 1 -
based.
str1$
Required. String expression being searched.
str2$
Required. String expression sought.
Note:
This command has been supported since V6.59 EZ and later firmware.
Example
Sample code
DOWNLOAD "DEMO.BAS"
string$="ABC123ABC123"
searchfor$="123"
starpos=8
temp1=INSTR(string$,searchfor$)
temp2=INSTR(starpos,string$,searchfor$)
str1$=searchfor$+" in "+string$+" is "+STR$(temp1)
str2$=searchfor$+" in "+string$+" after"+STR$(starpos)+" is "+STR$(temp2)
SIZE 4,1
GAP 0,0
DIRECTION 1
CLS
TEXT 10,10,"3",0,1,1,str1$
TEXT 10,60,"3",0,1,1,str2$
PRINT 1
EOP
DEMO
Result
See Also
STRCOMP()

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC