TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 125 Copyright 2013 All Rights Reserved.
 LOC( )
Description
This function returns the current read/write position within an open file.
Syntax
LOC(file handle)
Parameter
Description
file handle
0 or 1
Note:
This command has been supported since V6.86 EZ and later firmware.
Example
Sample code
DOWNLOAD "DATA.DAT",30,12345678
12345678
12345678
DOWNLOAD "TEST.BAS"
str1$ = ""
location = 0
OPEN "DATA.DAT",0
READ 0,str1$
location = LOC(0)
CLOSE 0
SIZE 4,1
GAP 0,0
CLS
TEXT 10,10,"3",0,1,1,"str1$: "+str1$
TEXT 10,60,"3",0,1,1,"Location:"+STR$(location)
PRINT 1
EOP
TEST
Result

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC