TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 78 Copyright 2013 All Rights Reserved.
Status Polling and Immediate Commands
These commands support RS-232, USB and Ethernet.
 <ESC>!?
Description
This command obtains the printer status at any time, even in the event of printer error. An inquiry
request is solicited by sending an <ESC> (ASCII 27, escape character) as the beginning control character
to the printer. A one byte character is returned, flagging the printer status. A 0 signifies the printer is
ready to print labels.
Syntax
<ESC>!?
Hex Receive
Printer Status
00
Normal
01
Head opened
02
Paper Jam
03
Paper Jam and head opened
04
Out of paper
05
Out of paper and head opened
08
Out of ribbon
09
Out of ribbon and head opened
0A
Out of ribbon and paper jam
0B
Out of ribbon, paper jam and head opened
0C
Out of ribbon and out of paper
0D
Out of ribbon, out of paper and head opened
10
Pause
20
Printing
80
Other error
See Also
<ESC>!S

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC