To Next Page

To Previous Page

 LOB( )

Description

This function returns the size of data in receiving buffer.

Syntax

LOB ()

Note:

This command has been supported since V6.78 EZ and later firmware.

Example

Sample Code

DOWNLOAD "TEST.BAS"

DATA$=""

WHILE LOB()<>0

DATA$=DATA$+INP$(1)

WEND

SIZE 4,0.5

GAP 0,0

CLS

BOX 10,10,800,100,2

BLOCK 15,15,790,90,"0",0,8,8,DATA$

PRINT 1

EOP

TEST

We stand behind our products with one of the most comprehensive support programs in the

Auto-ID industry.

Result

203 dpi:

300 dpi:

Other manuals for TSC TTP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC