TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 189 Copyright 2013 All Rights Reserved.
 SET HEAD
Description
This setting is used to enable/disable head open sensor. If the head open sensor is turned off, an open
printer head will not return an error message. This setting will be saved in printer memory. This
command is only available for BPL2 printers.
Syntax
SET HEAD ON /OFF
Parameter
Description
ON
Turn on the “HEAD OPEN” sensor
OFF
Turn off the “HEAD OPEN” sensor
Model
Support
TTP-243 series
TTP-243 Plus series
TTP-244ME series
V
TTP-244ME Plus series
V
TTP-244 series
TTP-244CE series
V
TTP-245 series
V
TTP-245C series
V
TDP-245 series
V
TTP-246M series
V
TTP-248M series
V
TTP-2410M series
V
TDP-643 Plus
TDP-643R Plus
TTP-342 series
TTP-342 Plus series
TTP-342M series
V
TTP-342M Plus series
V
TTP-343 series
V
TTP-343C series
V
TTP-344M series
V
TTP-346M series
V
TTP-384M series
V
TTP-644M series
V
M23 series
Example
SET HEAD ON
SET HEAD OFF

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC