TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 34 Copyright 2013 All Rights Reserved.
Label Formatting Commands
 BAR
Description
This command draws a bar on the label format.
Syntax
BAR x,y,width,height
Parameter
Description
x
The upper left corner x-coordinate (in dots)
y
The upper left corner y-coordinate (in dots)
width
Bar width (in dots)
height
Bar height (in dots)
Note:
 200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
 Recommended max. bar height is 12 mm at 4” width. Bar height over 12 mm may damage
the power supply and affect the print quality.
 Max. print ratio is different for each printer model. Desktop and industrial printer print
ratio is limited to 20% and 30% respectively.
Example
Sample code
SIZE 50 mm,25 mm
GAP 3 mm,0
DIRECTION 1
CLS
BAR 80,80,300,100
PRINT 1,1
Result
See Also
BOX
80
80
100
300

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC