TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 29 Copyright 2013 All Rights Reserved.
 SELFTEST
Description
At this command, the printer will print out the printer information.
Syntax
SELFTEST [page]
Parameter
Description
page
omitted: Print a self-test page with whole printer information.
PATTERN: Print a pattern to check the status of print head heat line.
ETHERNET: Print a self-test page with Ethernet settings.
WLAN: Print a self-test page with Wi-Fi settings.
RS232: Print a self-test page with RS-232 settings.
SYSTEM: Print a self-test page with printer settings.
Z: Print a self-test page with emulated language settings.
Example
Sample code
Result
SELFTEST

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC