TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 195 Copyright 2013 All Rights Reserved.
Execute:
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~4
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2, Label 2
Syntax
Receive “PRINT -1,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY 5
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~7
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY 5
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2~6
Syntax
Receive “PRINT –1,n”
Print Out
SET PRINTKEY 5
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC