TSC TTP-247 Programming Manual

2012/11/27
Add WHILE … WEND command.
Ernest
2012/11/27
Add DO … LOOP command.
Ernest
2012/11/27
Add TEXTPIXEL() command.
Ernest
2012/11/27
Add BARCODEPIXEL() command.
Ernest
2012/11/27
Add GETSENSOR() command.
Ernest
2012/11/27
Add GETSETTING() command.
Ernest
2012/11/28
Revise SET CUTTER command.
Ernest
2012/11/28
Revise OPEN command.
Ernest
2012/11/28
Revise FOR … NEXT LOOP command.
Ernest
2012/11/28
Add CLOSE command.
Ernest
2012/11/28
Add COPY command.
Ernest
2012/11/28
Add MPDF417 command for Micro PDF 417 barcode.
Ernest
2012/11/30
Add EOJ command.
Ernest
2012/11/30
Add DELAY command.
Ernest
2012/11/30
Add DISPLAY command.
Ernest
2012/11/30
Add XOR$() command.
Ernest
2012/11/30
Add _MODEL$ variable.
Ernest
2012/11/30
Add _SERIAL$ variable.
Ernest
2012/11/30
Add _VERSION$ variable.
Ernest
2012/11/30
Revise LIMITFEED command.
Ernest
2012/11/30
Revise BOX command.
Ernest
2012/11/30
Add SET FEED_LEN command.
Ernest
2012/12/20
Add external Wi-Fi module setting commands.
Ernest
2012/12/20
Add Ethernet setting commands.
Ernest
2012/12/24
Revise DMATRIX command.
Ernest
2012/12/24
Revise LIMITFEED command.
Ernest
2012/12/24
Revise SELFTEST command
Camille
2013/2/5
Add sample result for each section
Camille
2013/2/6
Add CODEPAGE 864 (Arabic) ; since F/W V7.0
Camille
2013/2/26
Add <ESC>!F command.
Camille
2013/2/26
Add <ESC>!. command.
Camille

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC