TSC TTP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. III Copyright 2013 All Rights Reserved.
GOSUB…RETURN.............................................................................................................................. 139
GOTO ................................................................................................................................................ 140
INP$( ) .............................................................................................................................................. 141
INP( ) ................................................................................................................................................ 142
LOB( ) ................................................................................................................................................ 143
INPUT ............................................................................................................................................... 144
PREINPUT ......................................................................................................................................... 145
POSTINPUT ....................................................................................................................................... 146
SET FILTER ON/OFF ........................................................................................................................... 147
REM .................................................................................................................................................. 148
OUT .................................................................................................................................................. 149
OUTR ................................................................................................................................................ 150
GETKEY( ) .......................................................................................................................................... 151
INT( ) ................................................................................................................................................. 152
LEFT$( ) ............................................................................................................................................. 153
LEN( ) ................................................................................................................................................ 154
MID$( ) ............................................................................................................................................. 155
RIGHT$( ) .......................................................................................................................................... 156
STR$( ) .............................................................................................................................................. 157
STRCOMP ( ) ..................................................................................................................................... 158
INSTR ( ) ............................................................................................................................................ 159
TRIM$( ) ............................................................................................................................................ 160
LTRIM$( ) .......................................................................................................................................... 161
RTRIM$( ) ......................................................................................................................................... 162
TEXTPIXEL( ) ..................................................................................................................................... 163
BARCODEPIXEL( ) .............................................................................................................................. 164
VAL( ) ................................................................................................................................................ 165
BEEP ................................................................................................................................................. 166
NOW$( ) ........................................................................................................................................... 167
NOW................................................................................................................................................. 168
FORMAT$( ) ...................................................................................................................................... 169
DATEADD() ....................................................................................................................................... 171
Device Reconfiguration Commands ..................................................................................................... 173
SET COUNTER ................................................................................................................................... 173
SET CUTTER ...................................................................................................................................... 174
SET PARTIAL_CUTTER ....................................................................................................................... 175
SET BACK .......................................................................................................................................... 177
SET KEY1, SET KEY2, SET KEY3 ........................................................................................................... 179
SET LED1, SET LED2, SET LED3 .......................................................................................................... 181
SET PEEL ........................................................................................................................................... 183
SET TEAR & SET STRIPER ................................................................................................................... 184
SET GAP ............................................................................................................................................ 186
SET BLINE ......................................................................................................................................... 188
SET HEAD .......................................................................................................................................... 189
SET RIBBON ...................................................................................................................................... 190
SET ENCODER ................................................................................................................................... 191
SET RIBBONEND ............................................................................................................................... 192
SET COM1 ......................................................................................................................................... 193
SET PRINTKEY ................................................................................................................................... 194
SET REPRINT ..................................................................................................................................... 196
SET FEED_LEN .................................................................................................................................. 197
GETSENSOR() ................................................................................................................................... 198
GETSETTING$() ................................................................................................................................. 200
SET USBHOST KEYBOARD/SCANNER ................................................................................................ 203
SET AUTORUN .................................................................................................................................. 204
PEEL .................................................................................................................................................. 205

TSC TTP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Weight	2.5 kg
Max Print Speed	7 ips
Memory	8 MB SDRAM, 4 MB Flash
Interface	USB 2.0, Serial
Ribbon Capacity	300 meters
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.06 mm ~ 0.19 mm
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25% to 85%, non-condensing
Certifications	CE, FCC, UL, CCC