105
105
• Same name will get displayed in the app as
shown or else press the ‘Scan Device’ tab (A) to
scan and display the near by device. Now, select
the ‘TVSRTR310DDA0318’ in app to initiate the
pairing process.
A
• Enable the access control and press the ‘Pair’ tab
to initiate the pairing in the new page of the app.
• On initiating the pairing process, a Passkey will
get generated and displayed in the Connected
TFT instrument cluster as shown.
Set
km/h
60
oc
Coolant Temp
30
km
Range
30
rpm
6700
5
km/h
URBAN
05:30
PM
Pairing Devices
TVSRTR310DDA0318
Device name
999
MENU
Passkey
• Now, enter pass key ‘702438’ in the app and
pres ‘OK’ tab to initiate the pairing process.
To Next Page
Loading...
Need help?
General
