UFactory xArm User Manual

128
Change Password
The user password of the Advanced Tools can be modified in the page
shown above.
Note: Please keep the new password properly. If the password is lost, you
will need to contact UFACTORY to reset the password.
1.4.10 System Settings
System Settings mainly include Check Update, System Information,
Network Settings, and Log.
Check Update
● Software updates for xArm Studio, and firmware updates for the

UFactory xArm Specifications

General

Payload	5 kg
Repeatability	±0.1 mm
Programming Language	Python, C++, ROS
Communication Interface	Ethernet
Operating Temperature	0°C to 45°C