Unipulse F372A - 7-2. DAV;DAI Option; 7-3. CC-Link Option; 7-4. DeviceNet Option

142
7 OPTION INTERFACES
142
OPTION INTERFACES
Chapter
7
7-2. DAV/DAI Option
At standard time, you can select real time value or hold value.
At expansion Double Hold time, you can select real time value, hold value A, or hold value B.
* Before Value / Relative Value cannot be output.
7-3. CC-Link Option
You can read values corresponding to the expansion condition from remote register R⇒M (F372A
→sequencer) when four stations are occupied.
* For details, see the CC-Link-specific operation manual.
7-4. DeviceNet Option
You can read from the data area added according to the expansion condition separately from the
standard address area.
* For details, see the DeviceNet-specific operation manual.