47
5 SETTING OF FUNCTIONS
47
SETTING OF FUNCTIONS
Chapter
5
■Comparison output selection
The number of HI-LO limits can be changed.
Correspondence between comparison screens and external I/O output terminals.
How to set
A2 A3 A4 A5 A6
H4 / L0 HI-4 HI-3 OK HI-2 HI-1
H3 / L1 HI-3 HI-2 OK HI-1 LO
H2 / L2 HH HI OK LO LL
H1 / L3 HI LO-1 OK LO-2 LO-3
H0 / L4 LO-1 LO-2 OK LO-3 LO-4
Mode HI limit operation LO limit operation
H4 / L0 HI-1 to HI-4 None
H3 / L1 HI-1 to HI-3 LO
H2 / L2 HH, HI LO, LL
H1 / L3 HI LO-1 to LO-3
H0 / L4 None LO-1 to LO-4
The HI limit output is turned on when the indicated value becomes larger than the set value.
The LO limit output is turned on when the indicated value becomes smaller than the set value.
SET. Comp. Setting Page 2
→→
Work Setting
→
[HI-0, LO-4]
[HI-1, LO-3]
[HI-2, LO-2]
[HI-3, LO-1]
[HI-4, LO-0]
[Setting] [Comparison]
To Next Page
Loading...
