89
8 SUPPLEMENTS
89
SUPPLEMENTS
Chapter
8
8-2. Protect / Initialization
■Work setting protect
Set whether to protect the set values in Work Setting from changing.
Setting range: ON / OFF
How to set
■System setting protect
Set whether to protect the set values in System Setting from changing.
Setting range: ON / OFF
How to set
■Calibration protect
→See page34 "Calibration Protect".
How to set
■Expansion protect
Set whether to protect the set values in Expansion Setting from changing
Setting range: ON / OFF
How to set
■Initialization
All the set values of each setting item are initialized to their factory defaults.
Select the setting item you want to initialize.
Setting range: Work Set. / System Set. / Calibration Set./ Expansion Set.
* If the setting item on which you intend to execute initialization is protected, initialization cannot
be executed.
How to set
SET. Protect / Init. Page 1
→→
SET. Protect / Init. Page 1
→→
SET. Protect / Init. Page 1
→→
SET. Protect / Init. Page 1
→→
SET. Protect / Init. Page 1
→→
To Next Page
