19
1 OUTLINE
19
OUTLINE
Chapter
1
DC power input terminal block
Connect the DC power cord. The power supply voltage is 24V DC (±15%).
Adaptable crimp terminal [TMEV1.25-3S]
Frame ground
Please ground the frame ground terminal to prevent failures due to static electricity.
(The frame and the frame ground terminal are conducted.)
It may be better to remove depending on the environment of the installation location.
Protective ground
Be sure to ground the protective ground terminal to prevent electric shocks.
Optional slot
Any one of the following optional boards can be mounted.
- BCD data output
- D/A converter (voltage or current output)
- CC-Link interface (CC-Link is an abbreviation for "Control & Communication Link".)
- DeviceNet interface
RS-232C connector
RS-232C connector to transmit / receive measurement data and status information, etc.
The adaptable plug is HOSIDEN-manufactured TCP8080-015267 or equivalent.
Optionally available RS-232C cable (cross) [CA81-232X] is connectable.
To Next Page
Loading...
