UniVer TC - LED Status and Diagnostics: Profinet

Rev.B15
Pg. 41 di 80
LED Status and Diagnostics - Profinet
LED
Color
Status
Meaning
ON/Diag
On No error.
Flashing Error, see error codes table for further details.
Flashing Fatal error, see error codes table for further details..
Run/Rdy
On Operative system completely loaded and ready.
On Error during loading of operative system or configuration.
Flashing Boot loader mode active (6 Blink No 2
nd Stage Loader Loaded).
Flashing Operating system missing (2nd Stage Loader Loaded).
BF
On
System not configured; no actual connection to the bus; Master not
communicating.
Flashing No data exchange (Wrong configuration on the master).
Off No error.
SF
On Generic or extended diagnostics; watchdog timeout; system error.
Flashing DCP service signal sent via BUS.
Off No error.
OUT
SUPPLY
On
Power supply (24VA) on.
(manifold and output supply).
Off
Missing power supply (24VA).
(manifold and output supply).
LINK 1
On Ethernet connection on channel 1.
Off No Ethernet connection on channel 1.
LINK 2
On Ethernet connection on channel 2.
Off No Ethernet connection on channel 2.
ACT 1
Flashing Message Transmission/Receipt on channel 1.
Off No Message Transmission/Receipt on channel 1.
ACT 2
Flashing Message Transmission/Receipt on channel e 2.
Off No Message Transmission/Receipt on channel 2.