Pg. 46 di 80
Error codes - Profibus and CANopen
Diag
Color Status Meaning
1 Flashing
Lack of general power supply (24VA).
2 Flashings
One or more output are in short circuit or overloaded.
3 Flashings
Attention, high level of disturbance
4 Flashings
Module error (one or more modules are not working).
5 Flashings
No inputs or outputs module detected.
6 Flashings
Not valid address or LSS device not configurated.
7 Flashings
Reserved.
8 Flashings
Reserved.
9 Flashings
Lack of power supply +24V for inputs (overload).
10 Flashings
Lack of module power supply
11 Flashings
Reserved (EEprom Fail).
12 Flashings
Electric clamp in error.
13 Flashings
Short circuit or overload on the control outputs of the electric clamp.
To Next Page
Loading...
Need help?
General