Universal Robots UR-6-85-5-A

4.2. Declaration of Incorporation
4.2 Declaration of Incorporation
According to the machinery directive 2006/42/EC, the robot is considered a
partly completed machine. The following subsections corresponds to and are
in accordance with annex II of this directive.
4.2.1 Product manufacturer
Name Universal Robots ApS
Address Svendborgvej 102
5260 Odense S
Denmark
Phone number +45 8993 8989
E-mail address sales@universal-robots.com
International VAT number DK29138060
4.2.2 Person Authorised to Compile the Technical Documentation
Name Lasse Kieffer
Address Svendborgvej 102
5260 Odense S
Denmark
Phone number +45 8993 8971
E-mail address kieffer@universal-robots.com
4.2.3 Description and Identification of Product
The robot is intended for simple and safe handling tasks such as pick-and-place,
machine loading/unloading, assembly and palletizing.
Generic denomination UR-6-85-5-A
Function General purpose industrial robot
Model UR-6-85-5-A
Serial number of robot arm
Serial number of control box
Commercial name UR-6-85-5-A
4.2.4 Essential Requirements
The individual robot installations have different safety requirements and the in-
tegrator is therefore responsible for all hazards which are not covered by the
general design of the robot. However, the general design of the robot, includ-
ing its interfaces meets all essential requirements listed in annex I of 2006/42/EC.
The technical documentation of the robot is in accordance with annex VII
part B of 2006/42/EC.
74 UR-6-85-5-A