• Shift the speed range down by pressing the speed range selection - button.
You can change the speed range downwards by more than one step at a
time, directly from D to A for example. The change is implemented provided
that the driving speed at the time of the request is within the defined limits for
speed range changing. The request does not stay in the memory but has to
be repeated when the driving speed has reduced below the limit. The driving
speed limits for changing speed ranges given in the following table are
approximate and depend on the tyre size:
Speed range change Maximum driving speed (40 km/h
models)
Maximum driving speed (50 km/h
models)
Changing from D to C 17.5 km/h 22 km/h
Changing from C to B 9 km/h 11 km/h
Changing from B to A 5.5 km/h 7 km/h
A pop-up window indicating the speed range change shows on the display
until the requested gear is engaged.
• Shift speed range between ranges C and D.
You can change between speed ranges C and D without pressing the speed
range selection buttons when speed range C-D shifting automatics is
activated and shifting automatics is in the manual mode.
For example:
• When Powershift 5 of speed range C is engaged and you move the gear
lever forwards, the automatics shift the gear to the appropriate Powershift
gear in speed range D according to the driving speed and engine speed.
OR
• When Powershift 1 of speed range D is engaged and you move the gear
lever backwards, the automatics shift the gear to the appropriate
Powershift gear in speed range C according to the driving speed and
engine speed.
3. Operation
- 103 -
To Next Page
Loading...
Need help?
General
