GUID-15597209-5561-4EBD-BA5E-A13223789DB0
1. Switch for rear PTO
3.18.2.9 Adjusting the rear power take-off engagement
When working with heavily rotating implements, you can adjust the rear power
take-off (PTO) engagement in the tractor terminal transmission settings view. The
factory setting does not need to be changed for normal PTO use.
IMPORTANT: Make sure that the PTO shaft is suitable for heavy use.
1. Press ESC.
2. Navigate to the menu 2 with the up and down arrow buttons.
3. Press the right arrow button to enter the transmission settings view.
NOTE: When the power shuttle lever is in the parking brake position (P), you
can enter the transmission settings view by pressing the preprogramming
button.
4. Select the wanted memory slot with the left and right arrow buttons.
3. Operation
- 246 -
To Next Page
Loading...
