2. Press left and right arrow buttons or rotate the selector for the predefined
factory/user settings to move the selection over the function you are going to
change.
3. Press the OK button or the selector for the predefined factory/user settings.
The function selection view appears.
GUID-B6ECE828-C8B3-43DF-839C-7037E386F385
4. Press arrow buttons or rotate the selector for the predefined factory/user
settings to move the selection over the needed function.
NOTE: You can discard the made changes and return the previous view by
pressing ESC.
5. Press the OK button or the selector for the predefined factory/user settings.
The function is changed to the programme.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
3.19.8.3 Removing a programme function
1. Enter the programme editing view.
2. Press left and right arrow buttons or rotate the selector for the predefined
factory/user settings to move the selection over the function you are going to
remove.
3. Press the OK button or the selector for the predefined factory/user settings.
The function selection view appears.
GUID-B6ECE828-C8B3-43DF-839C-7037E386F385
4. Press arrow buttons or rotate the selector for the predefined factory/user
settings to move the selection over the delete symbol .
NOTE: You can discard the made changes and return the previous view by
pressing ESC.
3. Operation
- 262 -
To Next Page
Loading...
