Valtra T series Versu

4.8.1.3 Calibrating speed sensors
1. Choose a straight and even road with no traffic for the speed sensor
calibration.
2. Move the hand throttle lever to the low idling position.
3. Disengage the differential lock.
4. Disengage the four-wheel drive.
5. Press ESC button.
6. Navigate to the menu 2 with the up and down arrow buttons.
7. Press the right arrow button to enter the transmission settings view.
NOTE: When the power shuttle lever is in the parking brake position (P), you
can enter the transmission settings view by pressing the preprogramming
button.
8. Move the navigation box to the speed sensor calibration position
with
the arrow buttons.
• If the preconditions for calibrating the speed sensors are not met, the
following screen is displayed:
20
905
2
SET
1
2
3
START
GUID-BCA311CB-F2A1-45A4-850B-7F5533198E33
• If the preconditions for calibrating the speed sensors are met, the
following screen is displayed:
20
905
2
SET
1
2
3
START
GUID-78C47260-58F5-40D8-B4D5-E04BABD48856
9. Turn the wheels to the middle position.
10. Release the brake pedal and clutch pedal.
11. Select the forward driving direction.
4. Maintenance
- 377 -