3. Press the OK button or the selector for the predefined factory/user settings.
The programme renaming view appears.
ABC
1 2
IMPL1IMPL1
I M P L 1
GUID-05FEAC68-CB87-4268-8D78-48D93D2EB7CB
4. Rename the programme.
• Move the selection over the character you are going to change by
pressing left and right arrow buttons or by rotating the selector for the
predefined factory/user settings.
• Select the character by pressing up and down arrow buttons, the OK
button or the selector for the predefined factory/user settings.
• Change the character by pressing up and down arrow buttons or by
rotating the selector for the predefined factory/user settings.
• Accept the change by pressing left and right arrow buttons, the OK
button or the selector for the predefined factory/user settings.
• Move the selection to next character to be changed by pressing left and
right arrow buttons or by rotating the selector for the predefined factory/
user settings.
5. Move the selection over the saving symbol
by pressing left and right
arrow buttons or by rotating the selector for the predefined factory/user
settings.
6. Save the changes by pressing the OK button or the selector for the
predefined factory/user settings.
NOTE: You can discard the made changes and return the previous view by
pressing ESC.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
3.19.7.3 Removing a U-Pilot programme
1. Select the programme you are going to remove.
2. Press left and right arrow buttons to move the selection over the delete
symbol .
3. Operation
- 260 -
To Next Page
Loading...
Need help?
General
