Valtra T series Versu - Eco Mode; Using the Automatic Air Conditioning

Display
1
2
3
4
5
GUID-F20FB364-0A39-4A5B-BE19-605EA501B52F
1. Automatic mode
2. Fan speed
3. Set temperature/Fault information
4. Additional heater
5. ECO mode
Indicator Indication
Displayed when the automatic fan speed and the AC compressor are on.
Displays the fan speed.
Displays the selected target temperature.
If adjusted below 16°C, LO is displayed. If adjusted over 29°C, HI is displayed.
In case of failure, the fault code is displayed.
Displays the additional heater fan status and speed (OFF, 1, 2, AUTO).
Displayed when the ECO mode (temperature control without the AC compressor switched
on) is on.
3.6.4.2 Using the automatic air conditioning
NOTE: When you start the tractor, the air conditioning automatically defaults to
the last selected adjustment.
NOTE: If the battery has been disconnected, the air conditioning system starts a
calibration process automatically when turning the fan speed control knob to
AUTO. During calibration, the air conditioning system cannot be used.
3. Operation
- 85 -