Valtra T series Versu

3.8.15.2 Programming the driving speed cruise control
1
2
OFF
ON
OFF
AUTO
CONTROL
1
2
3
GUID-AE817AEA-FCA9-43BA-B33C-5C0CC619641A
1. Adjustment wheel
2. Driving speed cruise control memory button 2
3. Driving speed cruise control memory button 1
1. Set the desired driving speed.
Use the drive pedal or the hand throttle to set the wanted driving speed
value.
2. Select the memory slot to be used.
• To use memory slot 1, press the driving cruise control memory button 1.
• To use memory slot 2, press the driving cruise control memory button 2.
This saves the current driving speed to the corresponding memory slot
and activates it.
• If the wanted memory slot already has a speed value, set the new value
by pressing and holding the cruise control setting button for two seconds.
This replaces the old memory slot value with the new value.
3. Adjust the driving speed value of a memory slot with the adjustment wheel.
3.8.15.3 Activating and deactivating the driving speed cruise control
WARNING: Note the function of the hand throttle and adjustment
wheel before deactivating the cruise control. Adjust their position if
needed.
3. Operation
- 119 -